Home | King Industries, Inc.

K-FLEX® XM-366

Low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was designed for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to increase flexibility and decrease VOC.

NACURE® XC-235

Acid Phosphate catalyst supplied at 75% active in n-butanol. Particularly effective with partially alkylated melamines for automotive topcoats and primers, general industrials, wood coatings. It is recommended for use with high imino or partially alkylated type melamine crosslinkers.

K-SPERSE 152 - TiO2 Study

This study demonstrates the advantage of using K-SPERSE 152 to disperse titanium dioxide when compared to another commercially available dispersant. Improvement can be seen in dispersant efficiency, as measured by pigment dispersant demand. Also, due to the hydrophobicity of K-SPERSE 152, there is generally a reduction in water sensitivity and an improvement in corrosion resistance in the finished coating.

KX-450

NEW KX 450 is a water emulsifiable rust preventive based on calcium DNNS. Excellent rust prevention in humid environments. Biodegradable ester carrier. Stable emulsions & hard water tolerant. Low viscosity liquid for easy handling. Dry to touch film from 5% or less KX 450

NA-LUBE® AW-6360

An ashless multifunctional additive for industrial and automotive lubricants and greases. It exhibits excellent extreme pressure and antiwear properties. Additionally, NA-LUBE AW-6360 imparts outstanding steel corrosion protection and demulsibility to lubricants based on Group I, II and synthetic base stocks.

NACURE® XC-271

Catalyst for designed for epoxy carboxy clear coat systems giving excellent cure profiles at low temperature increasing the efficiency of your formulation.

K-KAT® XK 635

Non-tin catalyst recommended for ambient cured or force dried 2-component solvent based polyurethane systems. It can also be used in thermal cured 1-component blocked isocyanate systems.

NA-LUBE® BL-1232EL

Additive Package in Compliance with European Eco-Label Criteria (Commission Decision 2011/381/EU). NA-LUBE BL-1232 EL is an environmentally friendly multifunctional premium ashless additive package designed for use in ester-based systems.

NACURE^®Acid Catalysts
K-KAT^® Urethane Catalysts
K-FLEX^®Resin Modifiers
K-STAY^® Rheology Modifiers

K-SPERSE^® Dispersants

DISPARLON^® Thixotropes

DISPARLON^®Surface Control
NACORR^®Corrosion Inhibitors
DEOLINK^® Silanes
DEOGRIP^®Soft Feel & Anti Slip

NA-LUBE^® KR Alkyl Naphthalene
NA-LUBE^® BL Blends/Packages
NA-LUBE^® AW Antiwear
NA-LUBE^®AO Antioxidant
NA-LUBE^® EP Extreme Pressure
NA-LUBE^®ADTC - EP, RI
NA-SUL^® Corrosion Inhibitors
K-CORR^®Rust Inhibitors
K-CORR^® NF - YMD

REOGEN^®Processing Aids
DEOFLOW^®Processing Aids
BONDOGEN^®Peptizers
DISPERGUM^®Peptizers
PLASTOGEN^®Plasticizers
DEOVULC^®Accelorator Blends
DEOSTAB^®Vulc. Stabilizer
DEOLINK^®Liquid & Dry Silanes

FACTICE^®VVO

K-PURE^® Electronic Chemicals

NACURE^®Wire & Cable

NACURE^® Adhesive/Sealant

K-KAT^® Adhesive/Sealant

K-FLEX^®Adhesive/Sealant

K-KAT^® For Elastomers (non-tin)

K-FLEX^®For Elastomer

Solution Center

Sagging

K-STAY^® 730

Zero VOC additive which controls sag and reduces pigment settling with no effect on gloss. View K-STAY 730 Flyer

K-STAY

Rust & Corrosion

NA-SUL^®

Displays excellent demulsibility, solubility, and oxidation stability within your lubricant. View NA-SUL Flyer

NA-SUL

DBDTL Replacement

K-KAT^®

K-KAT catalyst show similar cure profiles to mercury without the negative effect on the environment. View K-KAT Flyer

K-KAT

Products Coatings Lubricants Rubber Specialty

Technical Support Coatings Lubricants Rubber Specialty

Technical Brochure Coatings Lubricants Rubber Specialty

Compliance Systems ISO 9001 ISO 14001 ISO 18001 Regulatory REACH

News Contact Sample RequestsCareers Affiliates Terms & Conditions

Tel: 203-866-5551 Toll Free: 800-431-7900 Fax: 203-866-1268 email: info@kingindustries.com

Site Map

K-FLEX® XM-366

NACURE® XC-235

K-SPERSE 152 - TiO2 Study

KX-450

NA-LUBE® AW-6360

NACURE® XC-271

K-KAT® XK 635

NA-LUBE® BL-1232EL

NACURE® Acid Catalysts K-KAT® Urethane Catalysts K-FLEX® Resin Modifiers K-STAY® Rheology Modifiers

K-SPERSE® Dispersants

DISPARLON® Thixotropes

DISPARLON® Surface Control NACORR® Corrosion Inhibitors DEOLINK® Silanes DEOGRIP® Soft Feel & Anti Slip

NA-LUBE® KR Alkyl Naphthalene NA-LUBE® BL Blends/Packages NA-LUBE® AW Antiwear NA-LUBE® AO Antioxidant NA-LUBE® EP Extreme Pressure NA-LUBE® ADTC - EP, RI NA-SUL® Corrosion Inhibitors K-CORR® Rust Inhibitors K-CORR® NF - YMD

REOGEN® Processing Aids DEOFLOW® Processing Aids BONDOGEN® Peptizers DISPERGUM® Peptizers PLASTOGEN® Plasticizers DEOVULC® Accelorator Blends DEOSTAB® Vulc. Stabilizer DEOLINK® Liquid & Dry Silanes

FACTICE® VVO

K-PURE® Electronic Chemicals

NACURE® Wire & Cable

NACURE® Adhesive/Sealant

K-KAT® Adhesive/Sealant

K-FLEX® Adhesive/Sealant

K-KAT® For Elastomers (non-tin)

K-FLEX® For Elastomer