Jan 14, 2014 K-PURE CDI-4302 Product Data Sheet - Product Data Sheet
K-PURE CDI-4302 is a high performance corrosion inhibitor designed for use in electronics applications especially to protect copper surface. K-PURE CDI-4302 has excellent water solubility and stability.

Jan 14, 2014 K-PURE CDI-4301 Product Data Sheet - Product Data Sheet
K-PURE CDI-4301 is a high performance corrosion inhibitor designed for use in electronics applications. K-PURE CDI-4301has excellent water solubility and stability.

Jan 14, 2014 K-PURE CDR-3317 Product Data Sheet - Product Data Sheet
K-PURE CDR-3317 is an aliphatic, low molecular weight urethane diol oligomer, supplied at 100% solids. It is recommended in systems that require adhesion promotion, chemical resistance, and hardness development. CDR-3317 is suitable for aminoplast resins, siloxanes and urethanes. CDR-3317 also behaves as a compatibilizer or coalescing aid, with the added benefit of co-reacting with the system.

Jan 14, 2014 K-PURE CDR-3316 Product Data Sheet - Product Data Sheet
K-PURE CDR-3316 is a low viscosity, 100% active, linear, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was designed to enhance flexibility and improve flow without hurting the hardness of the system. Typical formulations include cationic cured epoxies, aminoplast, siloxane and urethane based systems.

Jan 14, 2014 CDR-3315 Product Data Sheet - Product Data Sheet
CDR-3315 is a low viscosity, 100% solids, fully saturated, aliphatic polyester diol with primary hydroxyl groups. This product was designed to lower modulus, enhance flexibility and improve adhesion in cationic cured epoxies, aminoplast resins, siloxanes and isocyanate systems. At low levels, CDR-3315 can also improve the toughness of very brittle systems.

Jan 14, 2014 CDR-3314 Product Data Sheet - Product Data Sheet
CDR-3314 is a highly reactive, aliphatic polyester polyol, which is recommended for modifying cationic cured epoxy systems, aminoplast resins and siloxanes to give improvements in adhesion and flexibility. Its uniform, narrow molecular weight distribution and unique chemical structure provide exceptional and consistent performance and broad compatibility.

Jan 14, 2014 K-PURE TAG-2172 Product Data Sheet - Product Data Sheet
K-PURE TAG-2172 is an amine blocked Dodecylbenzenesulfonic acid (DDBSA) for use as a thermal acid generator. Typical activation ranges from 140°C to 190°C depending upon the variables of the formulation and application.

Jan 14, 2014 K-PURE TAG-2678 Product Data Sheet - Product Data Sheet
K-PURE TAG-2678 is a quaternary ammonium blocked triflic acid thermal acid generator specifically designed for use in thermally cured microlithography coatings.

Jan 14, 2014 K-PURE TAG-2713 Product Data Sheet - Product Data Sheet
K-PURE TAG-2713 is a semiconductor grade amine blocked thermal acid generator designed for use in microlithography coatings. Its activation range is between 120°C and 140°C depending upon time, formulation components and film thickness.

Jan 14, 2014 K-PURE CXC-1614 Product Data Sheet - Product Data Sheet
K-PURE CXC-1614 is a blocked acid catalyst based on a super acid. K-PURE CXC-1614 can catalyze the reaction of epoxy resins, ring opening of cyclic either groups, and polymerization of monomers sensitive to cationic polymerization.