HOME WHO WE ARE HELP/FAQ  CAREERS  ASK A CHEMIST
GO
Solutions through chemistry since 1932
Sample Requests
SDS Requests
Tech. Literature
New Products

BONDOGEN E

Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 

 

 BONDOGEN E is a high activity plasticizer, processing aid and peptizer based on a mixture of high
molecular weight sulfonic acid and low viscosity mineral oil.



ADVANTAGES:
Promotes easy and fast mixing of heavily loaded and highly
accelerated stocks
Inhibits scorch in stock preparation
Improves plasticity without changing curing rates or physical
properties
 



TYPICAL PROPERTIES:
Appearance                                                                                           Dark mahogany liquid
Chemical Composition                                                                          Alkylaromaticsulfonic acid in a low viscosity mineral oil.
Viscosity, SUS, @ 37.8ºC (ASTM D 445, DIN 51 550)                         200
Acid Number (ASTM E 301)                                                                  41mg KOH/g
Density @ 15.6ºC(ASTM D4052)                                                          0.93 g/ml
WeightPer Gallon @ 25ºC                                                                     7.7 lbs
Flash Point, COC (ASTM D 92, DIN 51 376)                                        120ºC (248ºF)
 
Note: The above analytical data are not specifications.
 



APPLICATIONS:
All Elastomers
 



SOLUBILITY:
Soluble in petroleum and synthetic lubricant base stocks and most common solvents. Insoluble in water. However, it is recommended to verify the solubility in the base oils used and the compatibility with other additives.
 


 
STORAGE AND HANDLING:
Store in a cool, dry place away from any direct source of heat and moisture. 
Maximum recommended storage temperature: 46ºC   (115ºF)
Avoid all personal contact. Observe good personal hygiene.
For additional information, it is advised to consult the Material Safety Data Sheet (MSDS) for BONDOGEN E.
Best if used within 2 years from the date of manufacture.

 

 
Technical Brochures Coatings Lubricants Rubber Specialty
 
Facebook Twitter LinkedIn
 
Tel: 203-866-5551       Toll Free: 800-431-7900       Fax: 203-866-1268      
Site Map   

King Industries, Inc

1 Science Road, Norwalk, CT 06852, USA
© 2017 King Industries, Inc