Deoflow 821

Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 


 Deoflow 821 is a zinc-free and water-free lubricant, dispersing, and mold release agent for use with FPM, ACM, and H-NBR rubber.

Deoflow 821 is proven to be an excellent mold release agent. It is effective against mill sticking and has a positive influence on flow and release in the injection mold process. Typical dosage is 1-3 phr.

Appearance                                                                                 Yellowish flakes
Chemical Composition                                                                 Pentaerythritol Stearate
Ash (%), 2hrs at 950°C, DIN EN ISO 3451-1                              0.2% max.
Dropping point (°C), Mettler apparatus, DIN ISO 2176               60 - 70
Density @20°C (DIN ISO 787 part 10A)                                     1.0 g/cm3

Mainly for FPM, ACM, and H-NBR rubber.

 Store in a cool, dry place away from any direct source of heat and moisture. Maximum recommended storage temperature: 25°C
Shelf Life is min. two years in the originally sealed package under the recommended storage conditions.
Avoid all personal contact. Observe good personal hygiene. For additional information, it is advised to consult the Material Safety Data Sheet (MSDS) for Deoflow 821
©2018 King Industries, Inc
Tel: 203-866-5551 Toll Free: 800-431-7900 Fax: 203-866-1268

King Industries, Inc

Science Road, Norwalk, CT 06852, USA