Deoflow S

Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 

 

 Deoflow S is a zinc-free and water-free lubricant and dispersing agent. It improves the flow properties of elastomers and mold release.



ADVANTAGES:
Deoflow S improves the flow properties of various elastomers and mold release.
Optimum dispersion and less sticking are obtained when Deoflow S is added at the beginning of the mixing cycle. It can also be added at the end of the mixing cycle or during warming up of the finished compound to obtain the best release effect. Zinc-free and water-free. Typical dosage is 1-5 phr.
 



TYPICAL PROPERTIES:
Appearance                                                                                      Beige pellets
Chemical Composition                                                                     Calcium salt of saturated fatty acids and amide-esters
Ash (%), 2hrs at 950°C, DIN EN ISO 3451-1                                   3.5 – 5.5
Dropping point (°C), Mettler apparatus, DIN ISO 2176                    100 - 110
Density @20°C (DIN ISO 787 part 10A)                                          1.0 g/cm3

Note: The above analytical data are not specifications.
 



APPLICATIONS:
Mainly for molded products, rubber compounds which are sensitive to interference caused by the presence of water and zinc contained in the processing aids.
 



 STORAGE AND HANDLING:
 Store in a cool, dry place away from any direct source of heat and moisture. Maximum recommended storage temperature: 25°C
Shelf Life is min. two years in the originally sealed package under the recommended storage conditions.
Avoid all personal contact. Observe good personal hygiene. For additional information, it is advised to consult the Material Safety Data Sheet (MSDS) for Deoflow S

 

 
www.kingindustries.com
©2017 King Industries, Inc
Tel: 203-866-5551 Toll Free: 800-431-7900 Fax: 203-866-1268

King Industries, Inc

Science Road, Norwalk, CT 06852, USA