Deovulc EG 3

Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 

 

 Deovulc EG 3 is a blend of accelerators designed as a general purpose solution
for EPDM.



ADVANTAGES:
Deovulc EG 3 is an excellent accelerator for general EPDM applications requiring a medium cure rate and an average compression set with non-staining and non-blooming requirements. Typical dosage is 3-5 phr for black loaded compounds or 5-6 phr for light colored compounds with 1-2 phr sulfur. No additional accelerators are required.
 



TYPICAL PROPERTIES:
Appearance                                                                                   beige,  non-dusting powder
Chemical Composition                                                                  Synergistic blend of highly active accelerators.       
Total Sulphur (%) ASTM D 1552 (LECO)                                     30.0 - 33.5
Density at 20°C (g/cm3) DIN ISO 787 part 10 A                           1.34 - 1.46 g/cm3
 



APPLICATIONS:
Wide range for non-blooming, non-staining EPDM articles.
 



STORAGE/HANDLING:
Store in dry places at a maximum of 25 °C in its originally sealed package.
Shelf life is a min. one year in the originally sealed package under the recommended storage.
Avoid all personal contact. Observe good personal hygiene. For additional information, it is advised to consult the Material Safety Data Sheet (MSDS) for Deovulc EG 3 conditions

 

 
www.kingindustries.com
©2017 King Industries, Inc
Tel: 203-866-5551 Toll Free: 800-431-7900 Fax: 203-866-1268

King Industries, Inc

Science Road, Norwalk, CT 06852, USA