HOME WHO WE ARE HELP/FAQ  CAREERS  ASK A CHEMIST
GO
Solutions through chemistry since 1932
Sample Requests
SDS Requests
Tech. Literature
New Products

NA-SUL 1101

 

Technical Data Sheet Sample Request SDS Request
Technical Data Sheet Request a Sample E-Mail Technical Manager

 

NA-SUL 1101 (formerly KX1101) is a high performance ashless corrosion inhibitor specifically designed for aluminum and zinc alloys. It is soluble in most oils and polyalphaolefins (PAO). It is also very easily emulsified. Due to the acid value of NA-SUL 1101, contamination with alkaline cleaners, metalworking fluids, or other alkaline process chemicals may result in the formulation of gels or other unwanted by-products. Compatibility tests should be carried out in order to identify any negative interactions.



 ADVANTAGES:
 Excellent corrosion inhibitor for aluminum and zinc alloys
 Ashless
 Free flowing liquid, no melting required
 Low odor, does not contain petroleum oxidates
 Excellent solubility in highly paraffinic base oils and PAO
 Can be emulsified at moderate pH
 



TYPICAL PROPERTIES:
Acid Number (ASTM D 4739)                                               125 mg KOH/g
Viscosity @ 40ºC (ASTM D 445, DIN 51 550)                      35 mm2/s (cSt)
Density @ 25ºC (ASTM D 4052)                                           0.96 g/ml
Weight Per Gallon @ 25ºC                                                    8.0 lbs.
Flash Point, COC (ASTM D 92, DIN 51 376)                        160ºC (320ºF)
Moisture Content (ASTM E 1064)                                          <0.1%

Note: The above analytical data are not specifications.
 



SOLUBILITY:
Soluble in petroleum and synthetic lubricant base stocks and most common solvents. Emulsifiable in water. It is recommended to verify the solubility in the base oils used and the compatibility with other additives.
 



APPLICATIONS:                                                             
                                                                                                  Typical Treat Levels
Corrosion Inhibitor (Aluminum, Zinc Alloys)                                   1.00% - 15.0%
Circulating Oils                                                                                0.05% - 1.0%
Metalworking Fluids (end use)                                                        0.10% - 1.0%

 

 
Technical Brochures Coatings Lubricants Rubber Specialty
 
Facebook Twitter LinkedIn
 
Tel: 203-866-5551       Toll Free: 800-431-7900       Fax: 203-866-1268      
Site Map   

King Industries, Inc

1 Science Road, Norwalk, CT 06852, USA
© 2017 King Industries, Inc