PLASTOGEN E

 

Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 

 

 PLASTOGEN E is an effective liquid plasticizer and mild processing aid for all elastomers. It is based
on a mixture of high molecular weight sulfonic acid and low viscosity mineral oil.



ADVANTAGES:
Effective plasticizer and softener in all elastomers
Useful in sponge and low durometer stocks
 



TYPICAL PROPERTIES:
Appearance                                                                                                 Mahogany Liquid
Chemical Compostion                                                                                 Alkylaromaticsulfonic acid in a low viscosity mineral oil
Viscosity, SUS, @ 37.8ºC (ASTM D 445, DIN 51 550)                               41
Acid Number (ASTM E 301)                                                                        1.1mg KOH/g
Density @ 15.6ºC(ASTM D4052)                                                                0.88 g/ml
WeightPer Gallon @ 25ºC                                                                           7.3 lbs
Flash Point, COC (ASTM D 92, DIN 51 376)                                              115ºC (239ºF)

Note: The above analytical data are not specifications.
 



APPLICATIONS:
All Elastomers
 



SOLUBILITY:
Soluble in petroleum and synthetic lubricant base stocks and most common solvents. Insoluble in water. However, it is recommended to verify the solubility in the base oils used and the compatibility with other additives.

 

 
www.kingindustries.com
©2017 King Industries, Inc
Tel: 203-866-5551 Toll Free: 800-431-7900 Fax: 203-866-1268

King Industries, Inc

Science Road, Norwalk, CT 06852, USA