HOME WHO WE ARE HELP/FAQ  CAREERS  ASK A CHEMIST
GO
Solutions through chemistry since 1932
Sample Requests
SDS Requests
Tech. Literature
New Products

Reogen E

 

Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 

 

REOGEN E is an all-purpose liquid plasticizer and processing aid for all elastomers. It is based on a mixture of high molecular weight sulfonic acid and low viscosity mineral oil.



ADVANTAGES:
Effective plasticizer and processing aid in all elastomers
Aids compounding and mold flow
Retards scorch
Use provides minimum loss of physical properties
 



TYPICAL PROPERTIES:
Viscosity, SUS, @ 37.8ºC (ASTM D 445, DIN 51 550)                                  49
Acid Number (ASTM E 301)                                                                           8.1 mg KOH/g
Density @ 15.6ºC(ASTM D4052)                                                                   0.89 g/ml
WeightPer Gallon @ 25ºC                                                                              7.4 lbs
Flash Point, COC (ASTM D 92, DIN 51 376)                                                 115ºC (239ºF)
 



APPLICATIONS:
All Elastomers
 



SOLUBILITY:
Soluble in petroleum and synthetic lubricant base stocks and most common solvents. Insoluble in water. However, it is recommended to verify the solubility in the base oils used and the compatibility with other additives.

 

 
Technical Brochures Coatings Lubricants Rubber Specialty
 
Facebook Twitter LinkedIn
 
Tel: 203-866-5551       Toll Free: 800-431-7900       Fax: 203-866-1268      
Site Map   

King Industries, Inc

1 Science Road, Norwalk, CT 06852, USA
© 2017 King Industries, Inc