Deoflow A


Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 


 Deoflow A – A zinc and water free dispersing agent.

Deoflow A has a dispersing action on fillers and improves the flow and extrusion properties of rubber compounds without having a peptizing or activating effect on vulcanization. Typical dosage is 2-6 phr.

Appearance                                                                         Beige pellets or flakes
Checminal Composition                                                       Mixture of fatty alcohols and fatty acid esters combined with lubricants
Ash (%), 2hrs at 950°C, DIN EN ISO 3451-1                      1.0% max.
Dropping point (°C),
Mettler apparatus, DIN ISO 2176                                        95 - 105°C
Density @20°C (DIN ISO 787 part 10A)                             0.9 g/cm3

Note: The above analytical data are not specifications.

Mainly for rubber compounds which are sensitive to interference caused by the presence of water or zinc contained in the processing aids. Deoflow A has proved very helpful in “Green Tire” compounds.

 Store in a cool, dry place away from any direct source of heat and moisture. Maximum recommended storage temperature: 25°C
Shelf Life is min. two years in the originally sealed package under the recommended storage conditions.
Avoid all personal contact. Observe good personal hygiene. For additional information, it is advised to consult the Material Safety Data Sheet (MSDS) for Deoflow A
©2020 King Industries, Inc
Tel: 203-866-5551 Toll Free: 800-431-7900 Fax: 203-866-1268

King Industries, Inc

Science Road, Norwalk, CT 06852, USA