Solutions through chemistry since 1932
Sample Requests
SDS Requests
Tech. Literature
New Products


Deoflow S

Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 


 Deoflow S is a zinc-free and water-free lubricant and dispersing agent. It improves the flow properties of elastomers and mold release.

Deoflow S improves the flow properties of various elastomers and mold release.
Optimum dispersion and less sticking are obtained when Deoflow S is added at the beginning of the mixing cycle. It can also be added at the end of the mixing cycle or during warming up of the finished compound to obtain the best release effect. Zinc-free and water-free. Typical dosage is 1-5 phr.

Appearance                                                                                      Beige pellets
Chemical Composition                                                                     Calcium salt of saturated fatty acids and amide-esters
Ash (%), 2hrs at 950°C, DIN EN ISO 3451-1                                   3.5 – 5.5
Dropping point (°C), Mettler apparatus, DIN ISO 2176                    100 - 110
Density @20°C (DIN ISO 787 part 10A)                                          1.0 g/cm3

Note: The above analytical data are not specifications.

Mainly for molded products, rubber compounds which are sensitive to interference caused by the presence of water and zinc contained in the processing aids.

 Store in a cool, dry place away from any direct source of heat and moisture. Maximum recommended storage temperature: 25°C
Shelf Life is min. two years in the originally sealed package under the recommended storage conditions.
Avoid all personal contact. Observe good personal hygiene. For additional information, it is advised to consult the Material Safety Data Sheet (MSDS) for Deoflow S


Technical Brochures Coatings Lubricants Rubber Specialty
Facebook Twitter LinkedIn
Tel: 203-866-5551       Toll Free: 800-431-7900       Fax: 203-866-1268      
Site Map   

King Industries, Inc

1 Science Road, Norwalk, CT 06852, USA
© 2021 King Industries, Inc