Deolink MX


Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 


Deolink MX is an activator for fillers and is based on thiocarboxysilane. It links to the rubber and to silica and other active white fillers leading to an improvement of the physical properties of the sulfur cured vulcanizate.

Deolink MX is an alternative to mercaptosilanes. It improves the tensile strength, modulus, compression set, and abrasion resistance for all commonly used elastomers. It can be used in a wide range of mixing temperature. Typical dosage is 1-8% of the silica-filler load. The PE wax carrier protects the silane from hydrolysis.

Appearance                                                                 White pellets
Chemical Composition                                                Thiocarboxysilane, 50% active on a PE wax carrier
Total Sulphur (%) ASTM D 1552 (LECO)                   3.8 - 4.8
Density at 25°C (g/cm3)\                                             1.0 g/cm3
Dropping point (°C), Mettler apparatus                       110 - 120

Note: The above analytical data are not specifications.

Wide range of sulfur cured elastomers and applications such as cables, roller coverings, seals, conveyer/V-belts, shoe soles, hoses and tubes, molded articles.

 Store in originally sealed packaging in cool, dry places. Maximum recommended storage temperature: 25°C
Shelf Life is min. one year under the recommended storage conditions.
Avoid all personal contact. Observe good personal hygiene. For additional information, it is advised to consult the Material Safety Data Sheet (MSDS) for Deolink MX
©2018 King Industries, Inc
Tel: 203-866-5551 Toll Free: 800-431-7900 Fax: 203-866-1268

King Industries, Inc

Science Road, Norwalk, CT 06852, USA