Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 


 BONDOGEN E is a high activity plasticizer, processing aid and peptizer based on a mixture of high
molecular weight sulfonic acid and low viscosity mineral oil.

Promotes easy and fast mixing of heavily loaded and highly
accelerated stocks
Inhibits scorch in stock preparation
Improves plasticity without changing curing rates or physical

Appearance                                                                                           Dark mahogany liquid
Chemical Composition                                                                          Alkylaromaticsulfonic acid in a low viscosity mineral oil.
Viscosity, SUS, @ 37.8ºC (ASTM D 445, DIN 51 550)                         200
Acid Number (ASTM E 301)                                                                  41mg KOH/g
Density @ 15.6ºC(ASTM D4052)                                                          0.93 g/ml
WeightPer Gallon @ 25ºC                                                                     7.7 lbs
Flash Point, COC (ASTM D 92, DIN 51 376)                                        120ºC (248ºF)
Note: The above analytical data are not specifications.

All Elastomers

Soluble in petroleum and synthetic lubricant base stocks and most common solvents. Insoluble in water. However, it is recommended to verify the solubility in the base oils used and the compatibility with other additives.

Store in a cool, dry place away from any direct source of heat and moisture. 
Maximum recommended storage temperature: 46ºC   (115ºF)
Avoid all personal contact. Observe good personal hygiene.
For additional information, it is advised to consult the Material Safety Data Sheet (MSDS) for BONDOGEN E.
Best if used within 2 years from the date of manufacture.
©2021 King Industries, Inc
Tel: 203-866-5551 Toll Free: 800-431-7900 Fax: 203-866-1268

King Industries, Inc

Science Road, Norwalk, CT 06852, USA