Deoflow Z

 Deoflow Z is a dispersing agent, zinc and water free

BEHAVIOUR AND EFFECTS:
Universial processing additive for rubber compounds based on EPDM, NR, SBR and CR, in which zinc-containing processing additives could cause interferences, as well as for complex mouldings. Deoflow Z acts as lubricant and dispersing agent. Deoflow Z improves the flow properties of the compounds and the release of the vulcanizates.
 

TYPICAL PROPERTIES:
Appearance                                                                                      Grey Pellets
Ash, 2 h at 950 °C (%) DIN EN ISO 3451-1                                     23 – 26
Dropping point, Mettler-apparatus (°C) DIN ISO 2176                     96 - 110
Density at 20°C (g/cm3) DIN ISO 787 part 10 A                              1.1 - 1.2
Dosage (phr)                                                                                     1 – 6
 

APPLICATIONS:
An optimum dispersing effect is obtained if Deoflow Z is added at the beginning of the mixing cycle. Sticking of the compounds to the mixing units is also reduced. To obtain the best release effect, Deoflow Z should be added at the end of the mixing cycle or during warming up of the finished compounds.
 

  
 STORAGE AND HANDLING:
 Store in a cool, dry place away from any direct source of heat and moisture. Maximum recommended storage temperature: 25°C
Shelf Life is min. two years in the originally sealed package under the recommended storage conditions.