Dispergum 24

 Dispergum 24 is a mild peptizer for natural rubber and synthetic polymers.

ADVANTAGES:
Dispergum 24 disperses rapidly and allows easy incorporation due to its good solubility in rubber. The duration of the mastication process is drastically reduced by the oxidation catalyst and the supporting effect of the zinc soap.
Typical dosage is 1-3 phr.
 

TYPICAL PROPERTIES:
Appearance                                                                                Beige pellets
Chemical Composition                                                               Calcium salt of saturated fatty acids and amide-esters
Ash (%), 2hrs at 950°C, DIN EN ISO 3451-1                             11.3 – 12.3
Dropping point (°C), Mettler apparatus, DIN ISO 2176              108 - 118
Density @20°C (DIN ISO 787 part 10A)                                    1.1 g/cm3

Note: The above analytical data are not specifications.
 

APPLICATIONS:
Peptizer for a wide temperature range in natural rubber or synthetic polymers.
Dispergum 24 is especially suitable for dynamic applications such as engine mounts.
 

 STORAGE AND HANDLING:
 Store in a cool, dry place away from any direct source of heat and moisture. Maximum recommended storage temperature: 25°C
Shelf Life is min. one year in the originally sealed package under the recommended storage conditions.
Avoid all personal contact. Observe good personal hygiene. For additional information, it is advised to consult the Material Safety Data Sheet (MSDS) for Dispergum 24.