Solutions through chemistry since 1932
Sample Requests
SDS Requests
Tech. Literature
New Products


K-CORR 100


Technical Data Sheet Technical Reports Mini Brochure Sample Request SDS Request
Technical Data Sheet

Industrial Lubricants

Steel Corrosion & Demulsibilty

Technical Data Sheet Request a Sample E-Mail Technical Manager


K-CORR 100 is an ashless rust inhibitor for industrial and automotive lubricants and greases.

Ashless rust inhibitor with an acid number less than 110 mg KOH/g
Good demulsification properties
No detrimental effect on FZG performance
Friction modifier when used in conjunction with EP/AW additives
Good thermal and hydrolytic stability
Biodegradability >90% per CEC-L-33-A-93

Nitrogen Content                                                                    2.7%
Viscosity @ 40ºC (ASTM D 445, DIN 51 550)                       470 mm2/s (cSt)
Viscosity @ 100ºC (ASTM D 445, DIN 51 550)                     22 mm2/s (cSt)
Density @ 25ºC (ASTM D 4052)                                            1.03 g/ml
Weight Per Gallon @ 25ºC                                                     8.6 lbs.
Acid Number, TAN (Potentiometric)                                       107 mg KOH/g
Mineral Oil Content                                                                 None
Flash Point, COC (ASTM D 92, DIN 51 376)                         165ºC (329ºF)

Note: The above analytical data are not specifications.

Soluble in petroleum and synthetic lubricant base stocks and most common solvents. Insoluble in water. However, it is recommended to verify the solubility in the base oils used and the compatibility with other additives.

APPLICATIONS:                                                              Typical Treat Levels
Hydraulic Fluids                                                                     0.05% - 0.5%
Circulating Oils                                                                      0.05% - 1.0%
Industrial and Automotive Gear Oils                                      0.10% - 1.0%
Paper Machine Oils                                                               0.25% - 1.0%
Greases                                                                                 0.50% - 3.0%

K-CORR 100 is a 100% active ashless rust inhibitor with a relatively low acid number compared to succinic acid half esters. K-CORR 100 is an excellent rust inhibitor for formulating ashless rust and oxidation oils, hydraulic oils, paper machine oils, and industrial and automotive gear oils. K-CORR 100 displays synergistic effects in the Four Ball Wear (ASTM D 4172) test when used in combination with ashless phosphorus-containing antiwear additives or sulfur-containing EP additives such as NA-LUBE® EP-5130. K-CORR 100 is well suited for formulating automotive CV-Joint greases when used in combination with EP/AW additives.


Technical Brochures Coatings Lubricants Rubber Specialty
Facebook Twitter LinkedIn
Tel: 203-866-5551       Toll Free: 800-431-7900       Fax: 203-866-1268      
Site Map   

King Industries, Inc

1 Science Road, Norwalk, CT 06852, USA
© 2021 King Industries, Inc