Solutions through chemistry since 1932
Sample Requests
SDS Requests
Tech. Literature
New Products




Technical Data Sheet Sample Request SDS Request
Technical Data Sheet  Request a Sample Technical Data Sheet 


NA-SUL CA/W1177 is an additive developed for use where water contact is likely such as dewatering fluids. NA-SUL CA/W1177 combines excellent corrosion protection for steel with good water separation characteristics.

Excellent rust inhibitor
Very good water displacement properties
Resists gelling from water contact
Compatible with contamination by most alkaline cleaners

Appearance                                                                    Dark brown viscous liquid
Chemical Composition                                                   Calcium alkylarylsulfonate/carboxylate and oxidized petrolatum
Calcium Content                                                             1.4 %
Density @ 25ºC (ASTM D 4052)                                    0.98 g/ml
Weight Per Gallon @ 25ºC (ASTM D 1475)                   8.2 lbs
Flash Point, COC (ASTM D 92, DIN 51376)                  160ºC (320ºF)

Note: The above analytical data are not specifications.

NA-SUL CA/W1177 is an excellent rust preventive additive with good water displacement. It is soluble in most mineral oils including Group II and III paraffinic oils. It is specifically designed for use in solvents such as white spirits and kerosene. Rust preventive performance is enhanced by the addition of 10% to 20% oil in combination with solvent. Solubility in specific oils and solvents should always be checked. NA-SUL CA/W1177 can be combined with waxes and resins for specialty applications.

NA-SUL CA/W1177 is particularly suitable as a dewatering fluid additive. It separates water from oil with no tendency to gel or skin at the organic/water interface. It is also generally compatible with contamination by alkaline cleaners and metalworking fluids. Compatibility with contaminants should be verified prior to use.

                                                                   Typical Treat Levels
Rust Preventive Fluids                               3.0% - 20.0%
Dewatering Fluids                                      3.0% - 15.0%

Soluble in most mineral oils and hydrocarbon solvents. However, it is recommended to verify the solubility in the oils and solvents used as well as compatibility with possible contaminants.


Technical Brochures Coatings Lubricants Rubber Specialty
Facebook Twitter LinkedIn
Tel: 203-866-5551       Toll Free: 800-431-7900       Fax: 203-866-1268      
Site Map   

King Industries, Inc

1 Science Road, Norwalk, CT 06852, USA
© 2021 King Industries, Inc