PLASTOGEN E
Technical Data Sheet |
Sample Request |
SDS Request |
|
 |
|
PLASTOGEN E is an effective liquid plasticizer and mild processing aid for all elastomers. It is based
on a mixture of high molecular weight sulfonic acid and low viscosity mineral oil.
ADVANTAGES:
Effective plasticizer and softener in all elastomers
Useful in sponge and low durometer stocks
TYPICAL PROPERTIES:
Appearance Mahogany Liquid
Chemical Compostion Alkylaromaticsulfonic acid in a low viscosity mineral oil
Viscosity, SUS, @ 37.8ºC (ASTM D 445, DIN 51 550) 41
Acid Number (ASTM E 301) 1.1mg KOH/g
Density @ 15.6ºC(ASTM D4052) 0.88 g/ml
WeightPer Gallon @ 25ºC 7.3 lbs
Flash Point, COC (ASTM D 92, DIN 51 376) 115ºC (239ºF)
Note: The above analytical data are not specifications.
APPLICATIONS:
All Elastomers
SOLUBILITY:
Soluble in petroleum and synthetic lubricant base stocks and most common solvents. Insoluble in water. However, it is recommended to verify the solubility in the base oils used and the compatibility with other additives.