Solutions through chemistry since 1932
Sample Requests
SDS Requests
Tech. Literature
New Products


NA-SUL CA-1259


Technical Data Sheet Technical Report Mini Brochure Sample Request SDS Request
Technical Data Sheet

Technical Data Sheet

Technical Data Sheet Request a Sample E-Mail Technical Manager


NA-SUL CA-1259 is a high performance liquid rust and corrosion inhibitor for rust preventives and dewatering fluids. It offers excellent solubility in a wide range of mineral oils, esters and vegetable oils. NA-SUL CA-1259 is less viscous than many other additives of its type and may often be able to be cold blended into oils. This results in lower energy cost and faster processing.
NA-SUL CA-1259 has an exceptional ability to help to separate water from oil and oil/solvent solutions making it very suitable for dewatering fluid applications. The solubility of NA-SUL CA-1259 should be verified in the diluents that are being considered for use.

Excellent rust inhibitor
Excellent water displacement
Liquid, minimizing the need for heating prior to use
Improved solubility enables use in a wide variety of diluents
Resists gelling in the presence of bulk water

Calcium Content                                                                     1.5% 
Acid Number (E 301)                                                              90 mg KOH/g
Viscosity @ 40ºC (ASTM D 445, DIN 51 550)                       1495 mm2/s (cSt) 
Viscosity @ 100ºC (ASTM D 445, DIN 51 550)                     62 mm2/s (cSt)
Specific Gravity@ 40ºC (ASTM D 4052)                                0.96
Specific Gravity@ 100°C (ASTM D 4052)                              0.92
Weight Per Gallon @ 25ºC                                                     8.1 lbs
Flash Point, COC (ASTM D 92, DIN 51376)                          160ºC (320ºF)
Moisture Content (ASTM E 1064)                                           0.05%

Note: The above analytical data are not specifications.

Soluble in most mineral oils, vegetable based fluids, esters and most common solvents. Insoluble in water. However, it is recommended to verify the solubility in the base oils used and the compatibility with other additives.

APPLICATIONS:                                                              Typical Treat Levels
Rust Preventive Fluids                                                          1.0% - 20.0%
Dewatering Fluids                                                                 2.0% - 15.0%

NA-SUL CA-1259 is a highly effective liquid rust and corrosion inhibitor that can be used in a variety of petroleum, vegetable based or synthetic diluents. It has excellent solubility in most common base fluids. It resists gelling when exposed to water and therefore can be used in high moisture applications such as rust preventives associated with wet parts. It is particularly recommended where water displacement is important. Contamination with some metalworking fluids may cause gelling. Compatibility with possible contaminants should be verified before use. Compatibility with other process chemicals should also be verified prior to use.


Technical Brochures Coatings Lubricants Rubber Specialty
Facebook Twitter LinkedIn
Tel: 203-866-5551       Toll Free: 800-431-7900       Fax: 203-866-1268      
Site Map   

King Industries, Inc

1 Science Road, Norwalk, CT 06852, USA
© 2021 King Industries, Inc