NA-SUL 1101 is a high performance ashless corrosion inhibitor specifically designed for aluminum and zinc alloys. It is soluble in most oils and polyalphaolefins (PAO). It is also very easily emulsified in water in combination with amines or alkyanol amines, producing stable emulsions at a pH as low as 8.
Whether in water systems or oil systems, NA-SUL 1101 provides excellent corrosion protection for aluminum and zinc alloys. Emulsions of NA-SUL 1101 do not blacken aluminum test pieces when submerged and kept at 85ºC for over 16 hours.
NA-SUL 1101 is not recommended for use in systems where cross-contamination with alkaline cleaners, metalworking fluids, or other alkaline process chemicals is likely.
| Metal Type | Ashless |
| Metal Content | 0% |
| Viscosity @ 100°C | 35 cSt |
| Viscosity @ 40°C | 769 cSt |
| Application Advantage | Corrosion resistance, Humidity resistance, Multi-metal protection, Rust inhibition, Salt spray resistance, Sprayable, Thin film |
| Formulation Advantage | Ashless, Easy to handle, Emulsifiable, Low odor, Solubility, Waterborne |
| Market Application | Metalworking, Rust preventive |
| Product Group | Rust preventive |
Related Products
-
NA-SUL 1019A
Metal Type AshlessMetal Content 0%Viscosity @ 40°C 350 cStRobust water-soluble rust and corrosion inhibitor. Provides excellent protection for steel, galvanized steel and aluminum. -
NA-SUL 437
Metal Type AshlessMetal Content 0%Viscosity @ 40°C 300 cStRust preventiveWater soluble rust preventive concentrate ideally suited for the manufacturing of water based rust preventive fluids and protecting aerosol can interiors. -
NA-SUL 450
Metal Type CalciumMetal Content 0.70%Viscosity @ 40°C 660 cStRust preventiveEmulsifiable rust preventive concentrate that forms stable emulsions in water with excellent rust protection for steel parts during storage and transportation.
Recently Viewed Products
-
NA-SUL 1019A
Metal Type AshlessMetal Content 0%Viscosity @ 40°C 350 cStRobust water-soluble rust and corrosion inhibitor. Provides excellent protection for steel, galvanized steel and aluminum. -
K-FLEX UD-320-100
Viscosity @ 50°C 7,000 cPsHydroxyl Number 350% Active 100Urethane diolRecommended for prepolymer synthesis and 100% solids WB/SB melamine crosslinked systems or 2K PU. Used for preparation of polyester polyurethanes or alkyd polyurethanes. Provides hardness and exterior durability -
DISPARLON 6100
Market Application AdhesivesApplication Advantage Anti-slumpFormulation Advantage Low activation temperatureRheology modifierPowdered polyamide thixotropic agent requiring lowest activation temperature for anti-slump in sealants and adhesives. Especially suited for MMA/MS polymer sealants.